EasyManua.ls Logo

ABB Relion 620 Series - Section 2 IEC 60870-5-103 Overview; IEC 60870-5-103 Standard

ABB Relion 620 Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 2 IEC 60870-5-103 overview
2.1 IEC 60870-5-103 standard
IEC 60870-5-103 is defined as a companion standard for the informative element of
protection equipment. While the official IEC 60870-5-103 standard dates back to
1997, the protocol has its roots in the VDEW6 communication protocol from the late
1980’s. A VDEW6 device can be seen as a subset of an IEC 60870-5-103 device but
not the opposite.
IEC 60870-5-103 defines communication for a serial, unbalanced link only.
Communication speeds are defined as either 9600 or 19200 baud.
Standard documentation
This manual assumes that the reader has some basic knowledge of the IEC
60870-5-103 protocol and the standard IEC 60870 documents relating to the protocol.
Table 1: Standard IEC 60870 documents relating to IEC 60870-5-103
IEC 60870
document part
Description
5-1 Transmission frame formats
5-2 Link transmission procedures
5-3 General structure of application data
5-4 Definition and coding of application information elements
5-5 Basic application functions
5-6 Conformance testing guidelines
5-103 Companion standard for the informative interface of protection equipment.
The IEC 60870-5-1…6 parts are also used in communication protocols like IEC
60870-5-101 and IEC 60870-5-104.
Interoperability and interchangeability
An IEC 60870-5-103 device can be interoperable and interchangeable or only
interoperable. Interoperability means that any required application data in the device,
which can be coded into an IEC 60870-5-103 data type, can be mapped into the IEC
60870-5-103 address space. This data is recognized by any IEC 60870-5-103 master.
Interchangeability means supporting the application data (informative elements)
whose semantics are pre-defined by the IEC 60870-5-103 standard. However, only a
very limited set of application data informative elements has been defined by the
standard. It should also be noticed that these sets of data are mainly defined for a
1MRS757647 C Section 2
IEC 60870-5-103 overview
620 series 7
Communication Protocol Manual

Table of Contents

Other manuals for ABB Relion 620 Series

Related product manuals