To Next Page
D
Dakota ValenciaAug 3, 2025
What to do if data isn't updating and reports are disabled on ABB Relays?
- CCraig AustinAug 3, 2025
If you observe slow or absent data updates and disabled reports with ABB Relays, the issue might stem from the configuration of your IED (Intelligent Electronic Device) applications. This commonly occurs when a new IED configuration is built from scratch. To resolve this, manually select the check boxes for clients of all visible 61850 data sets within the IEC 61850 Configuration tool. Refer to the engineering guide for detailed instructions on this procedure. This action enables reporting for the data sets, after which report control blocks should be visible on the Report Control tab.
General
