ABB Relion 620 Series - Semi-Flush Mounting the IED

A
B
C
D
E F
G
GUID-8A388D00-81BB-4C28-BC1B-D8C66F0C0E83 V1 EN
Figure 10: Flush mounted case and plug-in unit
A
262.2 mm
B 177 mm
C 246 mm
D 201 mm
E 153 mm
F 48 mm
G 160 mm
4.3.3 Semi-flush mounting the IED
A mounting kit is needed for semi-flush mounting the IED. The mounting kit includes
screws, a raising frame and gasket.
To install a semi-flush, a panel cut-out of 248 x 162 mm with mounting holes and 103
mm depth behind the panel is required.
1MRS757641 E Section 4
Mounting
620 series 21
Installation Manual