GUID-7BF7BB39-F24C-4D0A-8279-DED6D32B03F5 V1 EN
Figure 19: Wall-mounted IED
A 259 mm
B 318 mm
C 186 mm
Leave enough slack to wires and cables to allow installation
movement.
4.3.6 Rack mounting the IED and test switch RTXP to a 19”
equipment frame
A mounting kit is needed for rack mounting the IED in a 19" equipment frame. The
mounting kit includes a mounting panel and a metallic frame for mounting the RTXP
24 test switch to the panel.
An IED equipped with optical connections requires a minimum depth
of 180 mm. The allowed minimum bending radius has to be checked
from the optical cable manufacturer.
1MRS757641 E Section 4
Mounting
620 series 29
Installation Manual
To Next Page
Loading...
