1. Mount the mounting panel into the 19" rack.
2. Loosen the four M5 fixing screws in the case to fit the case into the panel cut-out.
3. Mount the case to the panel cut-out.
4. Install the optional metallic frame to mount the RTXP 24 test switch to the panel.
GUID-6B4F98A8-00E4-470F-A7EB-4E518D034E8B V1 EN
Figure 20: Mounting kit for the IED and an RTXP 24 test switch
GUID-38A0F9DB-4E4C-4628-BB2B-046AA2B5ED91 V1 EN
Figure 21: IED and the test switch RTXP 24 mounted into a 19" equipment panel
Section 4 1MRS757641 E
Mounting
30 620 series
Installation Manual
To Next Page
Loading...
