3 Unpacking, inspecting and storing
3.1 Removing transport packaging
Protection relays require careful handling.
1. Examine the delivered products to ensure that they have not been damaged
during the transport.
2. Remove the transport packaging carefully without force.
3. Attach the protective cover (supplied with the relay) on the top side of the relay
for the installation phase.
Figure 2: Attaching the protective cover on the top of the relay
The cardboard packaging material is 100% recyclable.
1MRS759115 E Unpacking, inspecting and storing
REX640
Installation Manual
15
To Next Page
Loading...
