ABB RELION REX640 - Page 21

4.3.1.2 Surface mounting local HMI
1. Make a cutout for the LHMI and drill holes for the raising frame according to the
dimensional drawing.
A
C
B
E
D
A 197 ±1 mm (7.7559 ±0.03937 in)
B Ø 6.0 mm (0.2362 in)
C 209 ±1 mm (8.2283 ±0.03937 in)
D 179 ±0.4 mm (7.0472 ±0.01575 in)
E 213 ±0.4 mm (8.3858 ±0.01575 in)
Figure 7: Making a cutout and drilling holes
1MRS759115 E
Mounting
REX640
Installation Manual
21