ABB RELION REX640 - Editing values

2
3
1
1
1 M5 screws
2 LHMI installation brackets
3 Mounting bracket
Figure 33: Mounting the local HMI and mounting brackets
3. Attach the mounting bracket to the protection relay with the M6 screws.
1
2
1 Mounting bracket
2 M6 screws
Figure 34: Attaching the mounting bracket to the protection relay
4. Tighten the M6 screws to 9 Nm ±5% (6.6381 ft-lb ±5%).
5. Lift the protection relay to its place on the existing screws on the bracket.
Mounting
1MRS759115 E
46 REX640
Installation Manual