Fiber Stripper
Brush
Prong Tool
Scissors
Crimp Tool
Cable Stripper
Diamond Cleave
Tool
Figure 49: Contents of the termination tool kit
Cable Stripper tool is not needed as the naked fiber 1MSC 380018.x00 has no jacket
to be stripped.
Step by step procedure:
1. Cut with scissors required length of the fiber, note that allowed maximum arc
loop sensor length with REX640 is 60 meters.
2. Install spacer sleeve and then crimp ring.
Figure 50: Spacer sleeve
Figure 51: Crimp ring
1MRS759115 E
Mounting
REX640
Installation Manual
59
To Next Page
Loading...
