Make sure to use the appropriate strip tool insert for the buffer
removal process: ROYAL BLUE.
Be careful while handling the FIBER STRIPPER. Handle as a precision
device and do not strike on hard surfaces or drop.
Be sure to clean blades frequently using small bristle brush supplied.
IMPORTANT: Pull straight when stripping the fiber buffer. The HCS
fiber cladding can be damaged if fiber is not pulled straight.
a) Insert the fiber through the guide tube of the fiber stripper until the cable
spacer sleeve bottoms out in the tube.
Figure 54: Using fiber stripper
b) Holding cable securely, squeeze handles to cut buffer and PULL straight to
remove buffer.
1MRS759115 E
Mounting
REX640
Installation Manual
61
To Next Page
Loading...
