A R A A A A B B E B U X D
Digit Description
A: ANSI A
B: IEC B
R:Feeder protection and recloser control
A
G&W / others B
VAC) A A
A A
A B
A C
Ports
N A
N B
serial glass fiber (ST) + IRIG-B ]
E
F
G
English
English + Spanish
Large LCD (standard) B
Single Phase
Three Phase
None N
U
HW Version D
2) Ordering code for UPS:
UPS120A 90…150 V AC
UPS240A 180…280 V AC
602236-UPS Please order always with UPS module and Functional Appl Opt B
3) When option G is selected, COM0022 or COM0023 is required.
4) Option G is not offered for Functional Appl option B
5) Option B (RA02) only available for SW 1.3 or later
36 RER620 ADVANCED RECLOSER PROTECTION & CONTROL
25. Selection and ordering data
The relay type and serial number label identifies the
protection and control relay . The label is placed
above the HMI on the upper part of the draw-out
unit. An order number label is placed on the side of
the draw-out unit as well as inside the case. The or-
der number consists of a string of alphanumeric
characters generated from the hardware and soft-
ware modules of the relay.
Use the ordering key information to generate the
order number when ordering complete protection
relays.
The order number consists of a string of alphanu-
meric characters generated from the hardware and
software modules of the relay.
Use the ordering key information below.
To Next Page
Loading...
