37
26. Accessories and ordering data
—
—
Item Order number
Tools
Test switches
Item Order number
Web-browser based user interface
MicroSCADA Pro Substation Automation system
27. Tools
The protection and control relay is delivered as a
pre-configured unit. The default parameter setting
values can be changed from the front panel user in-
terface, the web-browser based user interface
(WHMI) or the PCM600 tool in combination with
the relay specific connectivity package (CP).
PCM600 offers extensive relay configuration func-
tions such as relay signal configuration using the
signal matrix tool, and IEC 61850 communication
configuration including horizontal relay-to-relay
communication, GOOSE. The Protection and Con-
trol Relay Manager PCM600 is available in three dif-
ferent variants, that is PCM600, PCM600 Engineer-
ing and PCM600 Engineering Pro. Depending on
the chosen variant PCM600 offers extensive pro-
tection and control relay configuration functions
such as relay signal configuration, application con-
figuration, graphical display configuration includ-
ing single line diagram configuration, and IEC
61850 communication configuration including hori-
zontal GOOSE communication.
When the web-browser based user interface is
used, the protection and control relay can be ac-
cessed either locally or remotely using a web
browser (IE 7.0 or later). For security reasons, the
web-browser based user interface is disabled by
default. The interface can be enabled with the
PCM600 tool or from the front panel user interface.
The functionality of the interface can be limited to
read-only access by means of PCM600.
To Next Page
Loading...
