ABB RET 670 - View Trip Values; Trigger a Disturbance Report Manually

8.2.4 View trip values
In the Trip values section of a disturbance recording both the pre-fault and the fault
values for current, voltage and phase angle can be viewed. The recording number and
Trig time are also displayed. The path in the HMI is shown below.
Disturbance records/Record xx/Trip Values
8.3 Trigger a disturbance report manually
Using the manual trigger generates an instant disturbance report. Use this function to
get a snapshot of the monitored line. Follow the path below and answer yes in the
Execute manual trig dialog box.
Disturbance Records/Manual Trig
Section 8
Handle disturbances
32 Operator's manual
1MRK504049-UEN rev. D
RET 670