Activating Reset of LDCM counters sets the counter concerned to zero. A reset can
be performed by affirmation in the dialog box. This is done by pressing the E key
when YES is highlighted.
13.1.4 Reset temperature functions
The Reset temperature function under the Reset counters menu offers the following
reset possibilities. These are outlined below.
Reset/Reset temperature/ThermalOverload1TimeConstant(PTTR.25)
In the dialog box that appears, choose YES to reset.
Reset/Reset temperature/ThermalOverload2TimeConstant(PTTR.25)
In the dialog box that appears, choose YES to reset.
Section 13
Reset
RET 670 Operator's manual
1MRK504049-UEN rev. D
81
To Next Page
Loading...
