ABB RET670 - Breaker Failure Protection CCRBRF; Broken Conductor Check BRCPTOC; Capacitor Bank Protection CBPGAPC; Directional Over-Power Protection GOPPDOP

many others. The thermal overload functions have temperature threshold settings
as well as many others necessary for adapting the function to a particular application.
9.3.4.2 Breaker failure protection CCRBRF
Main menu/Settings/Setting Group N/Current protection/
BreakerFailure(RBRF,50BF)/CCRBRF:x
Displays some instances of CCRBRF with several settings per instance. Settings
include operation, base current, function mode, operation mode of retrip logic, time
delays and several others.
9.3.4.3 Broken conductor check BRCPTOC
Main menu/Settings/Setting Group N/Current protection/
BrokenCondCheck(PTOC,46)/BRCPTOC:x
Includes current and timer settings.
9.3.4.4 Capacitor bank protection CBPGAPC
Main menu/Settings/Setting Group N/Current protection/
CapacitorBankProtection(GAPC)/CBPGAPC:x
Displays some instances of CBPGAPC.
9.3.4.5 Directional over-power protection GOPPDOP
Main menu/Settings/Setting Group N/Current protection/
DirOverPowerProtection(PDOP,32)/GOPPDOP:x
Includes power, angle and calibration factor settings.
9.3.4.6 Directional under-power protection GUPPDUP
Main menu/Settings/Setting Group N/Current protection/
DirUnderPowerProtection(PDUP,37)/GUPPDUP:x
Includes power, angle and calibration factor settings.
9.3.4.7 Instantaneous phase overcurrent protection PHPIOC
Main menu/Settings/Setting Group N/Current protection/
InstPhaseOvercurrent(PIOC,50)/PHPIOC:x
Displays some instances of PHPIOC with some settable parameters per instance.
Operation mode, operate current multiplier, operation on or off, operate phase
current level as a percentage of IBase, and IBase itself are the settable parameters
available here.
1MRK504114-UEN E Section 9
Read and change settings
61
Operator's manual