Need help?Do you have a question about the ABB REJ601 and is the answer not in the manual?
General| Rated Frequency | 50/60 Hz |
|---|---|
| Communication Protocol | IEC 61850, Modbus RTU |
| Rated Current | 1/5 A |
| Operating Time | <35 ms |
| Reset Time | <35 ms |
| Communication | Ethernet, RS-485 |
| Protection Degree | IP20 |
Manual scope, intended users, and content overview.
Tracks changes across different document and product versions.
Explains symbols used for safety, warnings, and information.
Describes the product, its series, and version release history.
Details the relay's operational capabilities and pre-configured functions.
Covers additional features like self-supervision, fault records, and event logs.
Discusses real-time clock, access control, and power-ON sequence.
Details main protection types like overcurrent, earth fault, and inrush detection.
Covers negative sequence, phase discontinuity, and breaker failure protections.
Explains time/current curves for protection stages.
Describes configurable binary inputs, outputs, and LED indicators.
Introduces the Local Human-Machine Interface elements like LEDs, LCD, and keys.
Explains user access levels, passwords, and device configuration status.
Guides users through the menu structure for settings, measurements, and tests.
Covers unpacking, storage, and site environmental checks for installation.
Details relay wiring requirements and mounting dimensions.
Provides connection diagrams and information on ordering the relay.
Explains setting tables and proper earthing procedures.
To Next Page
