ABB S800 I/O - TB820 Modulebus Modem

*HQHUDO,QIRUPDWLRQDQG,QVWDOODWLRQ8VHU¶V*XLGH
6HFWLRQ$ 7%7%0RGXOH%XV2SWLFDO3RUW
3BSE 020 923R101 117
$ 7%7%0RGXOH%XV2SWLFDO3RUW
)HDWXUHV
• 1 fiber optic port for the Optical ModuleBus expansion
• ModuleBus (electrical) connection to the CI810/CI830, FCI and TB815.
'HV FULSWLRQ7%
The TB810 ModuleBus Optical Port is a communication interface between
the CI810 FCI electrical ModuleBus and the TB820 ModuleBus Modem of an
I/O cluster or ABB drives units via the Optical ModuleBus.
The TB810 can be used in both a simplex optical configuration as well as in a
duplex optical configuration. In a simplex configuration, the optical
Modulebus nodes are connected in a ring. In a duplex configuration,
the optical Modulebus nodes are connected in a row.
The TB810 has two connectors for fiber optic connections and a connection to
the communication interface module. The module is equipped with
Transmitter/Receiver for up to 10 Mbit/s. Both plastic and HCS (Hard Clad
Silica) optic fiber with connectors (HP Versatile Link) can be used with the
TB810.
'HV FULSWLRQ7%
The TB811 ModuleBus Optical Port is a communication interface between the
FCI electrical ModuleBus and the ABB drives units via the Optical
ModuleBus.
The TB811 can be used in a simplex optical ring configuration.
The TB811 has two connectors for fiber optic connections and a connection to the communication
interface module. The module is equipped with Transmitter/Receiver for up to 5 Mbit/s. Plastic and
optic fiber with connectors (HP Versatile Link) can be used with the TB811.
5[
7[
7[
5[