ABB | SACE Emax 2
Management operations
3 - Description
19 | © 2023 ABB | 1SDH001000R0002 - ECN000297030
Continued from the previous page
5. Unlatch the tongue and remove the lifting plates from the moving part. See Figure 41.
1
2
3
Figure 41
6. Make sure that the signalling device indicates the DISCONNECT position. See Figure 42.
Figure 42
7. Grip the guide levers of the fixed part and push them until the moving part stops. See Figure 43.
Figure 43
Continued on the next page
To Next Page
Loading...
