To Next PageTo Next Page
Need help?Do you have a question about the ABB SACE Tmax XT and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | SACE Tmax XT |
| Category | Circuit breakers |
| Language | English |
Illustrates initial steps for assembling the breaker mechanism, including applying grease and tightening screws.
Details attaching components to the breaker mechanism with specific torque values for fasteners.
Shows grease application on mounting brackets and specifies torque for securing components.
Depicts the final assembly stages of the flange handle mechanism onto the breaker unit.
Instructions for preparing the short end of the cable, referencing parts from the Cable XT7 Kit.
Instructions for preparing the long end of the cable, referencing parts from the Breaker Mechanism Kit.
Illustrates the process of connecting the prepared cable ends to the breaker mechanism assembly.
Ensures proper gap between edge guard and handle before inserting cable into yoke assembly.
Details the final tightening of the cable mechanism to the breaker with specified torque values.
Shows the 'TRIP' status indicator on the breaker and its relationship to the mechanism.
Illustrates how to check the correct operation of the installed mechanism using indicators.
Details a specific fastening step with torque requirements for the assembled mechanism.
Confirms the correct functioning of the breaker mechanism after installation.
