Need help?Do you have a question about the ABB SACE Tmax XT2 and is the answer not in the manual?
General| Standards | IEC 60947-2 |
|---|---|
| Frame Size | XT2 |
| Protection functions | Overload, Short-circuit, Ground fault (optional) |
| Operating Temperature | -25°C to +70°C |
| Type | Molded Case Circuit Breaker |
| Poles | 2, 3, 4 |
| Trip Unit Type | Electronic |
| Mounting | Fixed or Plug-in |
Manual's scope and structure overview.
Critical safety precautions and warnings for electrical equipment.
Core features and functions of Ekip Touch trip units.
Details on different Ekip Touch models like LSI, LSIG, Measuring, Hi-Touch, M Touch.
Description of fundamental overcurrent and short-circuit protections.
Overview of under/over voltage and phase sequence protections.
Functions for motor protection: blockage, undercurrent, phase loss, temperature.
Basic measurements like real-time currents and events.
Tools for analyzing voltage, current, and harmonic distortions.
Configuration of circuit breaker, grid frequency, and module parameters.
Details test procedures like Self-test, Trip test, and CB test for verifying functions.
Accessories like Ekip TT, Ekip Programming for testing and setup.
Overview of modules and software for extending functionality.
Modbus RTU communication module for RS-485 networks.
IEC 61850 communication module for Ethernet networks.
Module for managing programmable inputs/outputs.
To Next Page
