ABB SACE Tmax XT2 - Adaptive Protections

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 65
20 - Adaptive Protections
List
The Adaptive Protection package, available by default for Ekip Hi-Touch and Ekip M Touch
models and configurable on the remaining models as an additional software package, includes
the protection:
Name
Type of protection
Page
Doppio Set
Double protection settings
65
Dual Setting
The function allows having two different protection configurations, one as an alternative to the
other, managing the setting changes with programmable events.
The function can be activated in the Settings - Dual Setting menu (page 29).
Parameter
Description
Default
Enable
Activates/deactivates the function
OFF
Default set
Defines the main set of protections and the secondary set of
protections (which is activated in the presence of the
programmed event).
Set A
In the Advanced - Functions menu it is possible to program the event that causes the settings
change (from default to secondary). See the chapter Programmable commands (page 75).