1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 4
Introduction
1 - Content
This manual illustrates the characteristics of the Ekip Touch Trip units mounted on CB SACE
Tmax XT2 - XT4, including:
1. Overview
2. Management operations: installation, maintenance, malfunction identification
3. Operating conditions
4. Reference guide for changing parameters and measurement display
5. Accessories
In accordance with IEC 60050, this manual refers to two user profiles:
Skilled person in the electrical field (IEV 195-04-01): person with relevant education and
experience to enable him or her to perceive risks and to avoid hazards which electricity can
create
Instructed person in the electrical field (IEV 195-04-02): person adequately advised or
supervised by electrically skilled persons to enable him or her to perceive risks and to avoid
hazards which electricity can create
IMPORTANT: This manual details the operations that can be performed by people
trained in the electrical field.
All the remaining operations described in the manual must be carried out by
experts in the electrical field.
ABB will not be held responsible for damage to property or persons due to non-
compliance with the instructions contained in this document.
Requirements
and supporting
documentation
For an optimal installation and configuration of Ekip Touch, read the information contained in this
manual and in the technical product documentation available on the ABB library website:
General catalog CB SACE Tmax XT
Wiring diagrams CB SACE Tmax XT2-
XT4
Installation
Instructions
1SDH000721R0001
1SDH0000721R0002
Installation instructions CB SACE Tmax
XT2-XT4
The information contained in this document was written in Italian and then translated into other
languages to meet the legislative and/or commercial needs of the product in question.
To Next Page
Loading...
Need help?
General
