ABB SafePlus - Page 7

We reserve all rights in this document and in the information contained therein: Reproduction, use or disclosure to third
parties without express authority is strictly forbidden. © ABB Technology Ltd.
10. Pull the position indicator maximum 2 mm out and fit the bracket for the
auxiliary switch marked S7 behind the camshaft, as shown in the picture
Fix the auxiliary switch with 2 pieces of M4x10 screws
Dra ut stillingsindikeringen maksimalt 2 mm og vipp braketten med
signalvenderen merket S7 bak kamakselen, som vist in på bildet
Fest signal-venderen med 2 stk M4x10 skruer
11. Fix the bracket for the terminals marked X1 to the mechanism with
2 pieces of M6x10 screws
Fest braketten med rekkeklemmene merket X1 til mekanismen med
2 stk M6x10 skruer
ABB
ABB Technology Ltd.
Edition
1.0
Document No.
1VDD200027
Sheet No.
7/15