107
Figure 178: Isolated operation rod
—
7. Operation of the switchgear
Shutter lifting truck
Shutter lifting truck (optional accessories) can be
used for access to spouts after removing the
circuit-breaker from the circuit-breaker
compartment:
• Place the shutter lifitng truck 1 (Figure 176)
into the rails for the circuit-breaker truck in
circuit-breaker compartment
• Push the shutter lifting truck in using the
isolated operation rod 2 (Figure 176) and
open the shutters for access to spouts
• Rotate the operation rod to lock the truck
and pull the truck out when finished.
Actuating bars must be bolted in the top
position (for operation of the bottom
shutters) or in the bottom position (for
operation of the top shutters), as required.
Caution:
Never operate shutter lifting truck only by hand.
To Next Page
Loading...
