- 153 -
000699AG
7 - Operation
WLAN Logger Menu
By selecting the WLAN Logger menu, the following submenus can be
accessed:
WLAN Logger
Settings
Info
DOWN
ENTER
UP
1
2
Settings
Selecting Settings brings up the rst screen relating to the password.
The default password is "0000".
This can be changed by using the display buttons, following the same
procedure as always:
• ENTER scrolls through the digits (from left to right)
• ESC returns to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
• DOWN scrolls down the numerical scale (from 9 to 0)
• UP scrolls up the numerical scale (from 0 to 9)
After entering the password, press ENTER to access the information in
this section:
1. Restore AP
This section of the menu allows you to restore the "Access Point" mode
of the wireless module of the inverter.
To Next Page
Loading...
