ABB V-Contact VSC7/P

13
4. Storage
Whenaperiodofstorageisforeseen,theoriginalpacking
must be put back. Store the contactor in a dry dust-free
area. It must not be left outside or in adverse micro-climatic
conditions:ifitisleftwithoutprotection,rustanddeterioration
of the insulation can occur.
Insertspecialhygroscopicpacketsinsidethepacking,with
at least one standard packet per piece of apparatus. Replace
the packets approximately every 6 months.
Should the original packing no longer be available and
immediateinstallationisnotpossible,storeinacovered,
well-ventilated,dry,dust-free,non-corrosiveambient,witha
dryatmosphere,awayfromanyflammablematerialsandata
temperature between – 5 °C and + 40 °C.
Inanycase,avoidanyaccidentalimpactsorpositioning
which stresses the structure of the apparatus.
NEPSI.COM - Northeast Power Systems. Inc.