ABB VLMD-1-2 - Page 12

8
Modular digital instruments
VLMD-1-2-R
V
> 3 sec.
1
V
2
> 3 sec.
3
V
Select current to use
Minimum alarm threshold [V]
Maximum alarm threshold [V]
Alarm tripping delay [sec.]
Alarm cutout hysteresis [%]
Alarm output configuration
Reset min and max values
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of the parameter to set
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
1. Settings
EN