ABB VLMD-1-2 - Page 15

11
Instructions for the assemblage and the use
EMT
1
kWh kWh
3
kWh
> 3 sec.
kWh
2
kWh
4
kWh
5
> 3 sec.
> 3 sec.
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of full of scale required
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
4 Press the button repeatedly to select the value required.
5 Press and hold the button for at least 3 seconds to confirm the selec-
ted value.
EN