ABB VLMD-1-2 - Page 8

4
Modular digital instruments
AMTD-1-R / AMTD-2-R
A
> 3 sec.
1
A
2
> 3 sec.
3
A
Full scale setting [A]
Minimum alarm threshold [A]
Maximum alarm threshold [A]
Alarm tripping delay [sec.]
Alarm cutout hysteresis [%]
Alarm output configuration
Reset min and max values
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of the parameter to set
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
1. Adjustments and settings
EN