Abbott IonicRF - Cleaning Guidelines; Incident Reporting

Figure 7. Fastening the generator
4. Person 2: Thread each of the four capve thumb screws unl all4.
are engaged.
5. Person 2: Hand ghten each of the four capve thumb screws5.
unl the generator is fastened securely.
Cleaning Guidelines
To clean the pole mount, use any of the following:
▪
A cotton cloth soaked with 99% isopropyl alcohol
▪
▪
Sani-Cloth‡ AF3 germicidal disposable wipes
▪
For informaon about cleaning the generator or roll stand, refer to the
instrucons for use for the appropriate product.
Incident Reporng
In the course of use of this device, if you have reason to believe that a
serious incident occurred, please report it to the manufacturer. For
customers in the European Union, report the serious incident to your
naonal authority as well as to the manufacturer.
8