Abbott IonicRF - Step 2: Remove the Countertop Stand

WARNING: Ensure the pole mount is securely fastened to the
pole before aaching the generator. Failing to secure the pole
mount may cause the product to fall, resulng in injury or
product damage.
Step 2: Remove the Countertop Stand
NOTE: The IonicRF™ generator is supplied with an aached
countertop stand. Before aaching the generator to the pole mount,
the countertop stand must be removed. Always place the generator
on a level surface when adding or removing the countertop stand.
Figure 5. Removing the countertop stand from the generator
1.
Using your ngers, fully loosen each of the four capve thumb
1.
screws on the countertop stand unl they are disengaged from
the generator.
2.
Remove the stand from the generator.
2.
6