Abbott IonicRF - Adverse Events; Compatibility Guidelines; Pole Mount Components

Adverse Events
Supercial ssue injury may occur if the pole mount is not installed
and used according to this manual.
Compability Guidelines
Only the following products may be used with the IonicRF™ generator
pole mount (model RF‑POLE):
Product Model
IonicRF™ generator RFG‑IONIC
Roll stand RD‑0856
Pole Mount Components
The following gure provides informaon about the pole mount
components.
Figure 1. Pole mount shown with compable roll stand
Pole Mount
1.
Pole mount clamp base
2.
Capve thumb screws (4)
3.
Pole mount clamp cap
4.
Cap-head screws (2)
5.
Hex drive screwdriver
(5 mm)
Roll Stand (packaged separately)
6.
Tray
7.
Pole
8.
Wheels (3 non‑locking,
3 locking)
3