if not sent successfully. Each key press may transmit up
to 4 data packets with up to 20 bytes per packet,
depending on the number of packets that need to be
transmied (that is, if there is only one packet to
transmit, only one packet will be transmied). If the
interference is high (that is, the bit error rate exceeds
0.1%), the user may experience what appears to be a
slow connecon, diculty pairing devices, and a need to
decrease the distance between connected devices. For
informaon on how to improve connecon issues, see
“Troubleshoong for Wireless and Coexistence Issues”
(page 83).
Troubleshoong for Wireless and
Coexistence Issues
If you experience issues with the wireless
communicaon between the generator and the paent
controller, try the following:
▪ Decrease the distance between the devices.▪
▪
Move the devices so they share line of sight.
▪
▪ Move the devices away from other devices that may▪
be causing interference.
▪
Close the paent controller app and turn the
▪
paent controller o and on.
▪
Wait a few minutes and try connecng again.
▪
83