viii VP 2000™ Processor Operations Manual Addendum Version 2
30-602111/R1—June 2010
Safety and Electromagnetic Compatibility (EMC) Standards
This section addresses the safety and EMC compliance of the
following:
• the Abbott VP 2000 Processor
• the System Control Center
Abbott VP 2000 Processor
U.S. and Canadian Safety Standards
This instrument has been tested to and complies with standard
UL 61010-1, 2nd Edition, 2005-07-22 (Electrical Equipment for
Measurement, Control, and Laboratory Use: Part 1: General
Requirements) and CAN/CSA-C22.2 No. 61010-1, 2nd Edition,
2004-07, (Electrical Equipment for Measurement, Control, and
Laboratory Use: Part 1: General Requirements)
This instrument has been tested to and complies with standard
IEC 61010-1:2001, 2nd Edition and IEC 61010-2-10 (Particular
Requirements for Laboratory Equipment for heating of
materials).
This instrument has been tested to and complies with standard
IEC 61010-2-081 (Particular Requirements for automatic and
semi-automatic Laboratory Equipment for analysis and other
purposes).
This instrument has been tested to and complies with standard
IEC 61010-2-101 (Particular Requirements for in Vitro
Diagnostic (IVD) medical equipment).
To Next Page
Loading...
