Abit IP35V - Page 25

BIOS Setup
IP35V 2-3
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
- Estimated New CPU Clock
This item displays an estimated CPU processor speed.
- DRAM Speed (CPU:DRAM)
This item determines the DRAM frequency.
- PCI Express Frequency
This item selects the clock frequency for PCI Express slot.
Voltages Control
This option allows you to switch between the default and user-defined voltages. Leave this
setting at its default setting unless the current voltage setting cannot be detected or is not
correct. The option “Manual” enables you to select the following voltages manually.
- CPU Core Voltage
This item selects the Core voltage for CPU.
- DDR2 Voltage
This item selects the voltage for DRAM memory modules.
- CPU VTT Voltage
This item selects the VTT voltage for CPU.
- MCH 1.25V Voltage
This item selects the voltage for MCH (NB).
- ICH 1.50V Voltage
This item selects the voltage for ICH (SB).
- CPU GTLREF
This item selects the percentage ratio of CPU VTT voltage for the CPU GTL reference voltage.