Watch the pin position and
the orientation
P8/P9- Connect connectors P8 and P9 or the power supply unit to the correct
connectors on the mainboard.
Pin number
Name of the signal or
signification
1 POWERGOOD 7 Ground
2 +5VDC 8 Ground
3 +12VDC 9 -5VDC
4 -12VDC 10 +5VDC
5 Ground 11 +5VDC
6 Ground 12 +5VDC
J2 - There is an orientation pin.
Connect your keyboard
connector to connector J2 on the mainboard.
Mouse- Connect the six-threads PS/2
Mouse cable that comes with the hardware to the connector on the mainboard.
Install the bracket located on the other end of the computer case. When you
buy a Mouse, it has to be a PS/2 Mouse for it to be connected to this port.
Attach the bracket of Parallel Port, Serial Port and PS2 Mouse on the
computer case.
FAN - There is a specific
orientation. Connect the
three-threads CPU Fan power cable to the Fan connector on the mainboard.
Pin number
Name of the signal or signification
1 Ground
2 +12V
3 Ground
Installing Power input connector:
Installing Keyboard connector:
Installing PS2 Mouse:
Installing CPU Fan Power
connector:
To Next Page
Loading...
