6 / 19
4. Selection of booting methods
1) USB flash disk booting
The PS2 console has been modded and supports USB flash disk booting, so it can set to USB flash disk booting method. The
USB cable data port of the device needs to be plugged in the PS2 console. The game list is displayed immediately after startup.
2) FMCB memory card booting
The USB cable data port of the device needs to be plugged in the PS2 console. Users need to boot the file manager in FMCB
to run “OPL.elf” file in MASS device to show game list. The “OPL.elf” file in the virtual USB flash disk can be pre-copied
in other storage devices (such as physical USB flash disk or memory card) for next running. The new version of “OPL.elf”
file matching with the device can also be downloaded from the Internet. When using “OPL.elf” file on the devices other than
virtual USB flash disk of the device, the USB cable data port of the device does not need to be connected with PS2 console.
3) FMCB memory card automatic booting which has been set
The process is similar to “FMCB memory card booting”, the difference is to set the automatic running of OPL.elf after booting.
In this way, the game list will be displayed directly after startup. After running “OPL.elf” in the way of “FMCB memory card
booting”, selecting “boot the software after startup” in the tool settings to realize it.
4) Tool disks booting
It is similar to the method of “FMCB memory card booting”, except that the booting media is the disks. This booting method
requires disk-reading function of PS2 console.
5) Customized tool disks booting
After putting the customized booting disks in the disks drive and the USB cable data port of the device is connected with PS2
console, the game list will be displayed immediately after startup. This booting method requires normal and available PS2
console disks function.
5. Connect the PS2 console and start up
Connecting the network cable of the device to the PS2 console, connecting or not connecting USB cable according to booting
mode, and powering on the PS2 console. If the automatic running of the device’s customized OPL software is set, the game
list interface will be displayed, or the customized OPL software needs to run manually to display the game list. Just selecting
the game for entertainment.
To Next Page
Loading...
Need help?
General