9 / 19
9. Does it support IGR shortcut key operation？
The device supports the press R1+R2+L1+L2+Select+Start to return to the game list interface during the game. Press
R1+R2+L1+L2+R3+L3 during the game to shut down, power off the PS2 console and the power indicator turns to red.
10. What is the copy speed when connecting to the computer？
As a mobile hard disk drive cartridge connected to the computer, the operating speed can reach up to 9MB/s, including the
copy of game image, theme, God Hand Cheats and backup of game save files.
11. PS2 console is equipped with USB1.1 interface, is the speed very slow？
The device uses network channel to transmit game data, the USB interface is only used to transmit the matching customized
software when booting. PS2 console is equipped with 100M network interface, so the theoretical speed is 12.5MB/s. For the
consideration of hard disk drive response speed and transmission delay, the data transmission speed in the games can reach
6MB/s. there is still a margin which can be used to update the firmware to increase speed in the future.
12. Whether the device can be used on the non-modded PS2 console？
Instead of the support of modchip, the device only needs to boot file manger and run the customized OPL software of the
device for working, such as the running ways of FMCB, Swap Magic. For the non-modded PS2 console, the FMCB booting
method is recommended.
13. Is a memory card necessary？
The device only requires that the PS2 console can browse, run the matching customized OPL software after booting, so for
some booting methods, the memory card is not required. The device supports virtual memory card, except for a small number
of games, most game progresses are supported to save on the hard disk drive of the device, so there is no need for physical
memory card to save the game progress.
14. How to deal with the WinHIIP error that cannot operate the hard disk
drive？
When the hard disk drive is made to PS2 format, such error may occur. It is necessary to use the administrator rights to run
the computer software, such as WinHIIP. If users delete all the hard disk drive partitions to remove them and connect it to the
computer, the follow-up operations usually will not have the errors.
To Next Page
Loading...
Need help?
General