12 / 19
27. Game peripherals (light gun, steering wheel) of USB interface cannot
work
Just connect the USB auxiliary power port of the device to PS2 console, or power on the device with external power. Make
sure that the PS2 console USB peripherals do not work is not because of virtual USB flash disk function of the device. Users
can also disable the device’s USB function in the tool settings of device’s customized OPL software.
28. Does it support plugging and unplugging of the device during the boot-
up state？
The device’s data processing consumes little power, but the power consumption of the hard disk drive connected to the device
is relatively large. If plugging or unplugging the device during the boot-up state, it may cause PS2 console reset due to
excessive current drawn from the PS2 console to hard disk drive at the connecting moment. So if users want to use the device,
please power off the PS2 console (in standby state), and power on after connecting the network cable and USB cable. The use
of dual USB cable with auxiliary power supply can supply more stable power.
29. How to back up the device’s customized OPL software？
When the device is plugged in the USB port of PS2 console, it will be mimicked as a USB flash disk containing the customized
OPL software. Users can use the file manager (such as uLaunchELF) running on PS2 to browse virtual U flash drive, and
copy the customized OPL software to other storage devices which can be recognized by the PS2 console. Since then the device
can be used normally when running the customized OPL software on any storage device.
IX. Customer reviews
To Next Page
Loading...
Need help?
General