EasyManua.ls Logo

ABitTop PS2Netbox - Express Installation; FMCB Memory Card Booting, with PS2 Special Format Hard Disk Drive; MASS Booting, Developing Exfat General Format Hard Disk Drive; Faq

Default Icon
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 / 19
VII. Express installation (only two collocations are
shown)
1. FMCB memory card booting, with PS2 special format hard disk drive
1) Unscrew the casing to disassemble the device.
2) Install the hard disk drive on the bracket of the device, and tighten the hard disk drive fixing screws.
3) Install the device casing, and tighten the case screws.
4) Connect the computer through USB cable data and auxiliary power ports.
5) Run WinHIIP and select hard disk drive that appears after the device connection. The formatted hard disk drive
is HDLoader 48bit (the small hard disk drive is 28bit).
6) Select game image file in WinHIIP to complete the game recording.
7) Select remove USB on the computer to ensure that the mobile hard disk drive can be removed safely.
8) Connect two interfaces of USB cable and network cable to the PS2 console.
9) Insert FMCB bootable memory card, power on, and turn on the power switch of PS2 console.
10) Run the file manager in FMCB, browse and run OPL.elf in MASS device.
11) Select the game for entertainment through the gamepad in the displayed game list.
2. MASS booting, developing exFAT general format hard disk drive
1) Unscrew the casing and disassemble the device.
2) Install the hard disk drive on the bracket of the device, and tighten the hard disk drive fixing screws.
3) Install the device casing, and tighten the case screws.
4) Connect the computer through USB cable data and auxiliary power port.
5) Format the appeared mobile hard disk drive to exFAT through operating system hard disk drive management
function, and create OPL\DVD directory.
6) Copy the game image file to OPL\DVD directory.
7) Select safe to remove USB on the computer to ensure that the mobile hard disk drive can be removed normally.
8) Connect two ports of network cable, USB cable to the PS2 console.
9) Set the PS2 console that boot from MASS.
10) Power on, and turn on the power switch of PS2 console.
11) Select the game for entertainment through the gamepad in the displayed game list.
VIII. FAQ
1. Does it equipped with hard disk drive?
The product does not equipped with hard disk drive due to different demands of users.

Table of Contents