Absen LR3.9-7.8 - Product Installation; Preparation Before Installation; Cabinets Splicing

- 10 -
LR3.9-7.8 User Manual
2．Product Installation
2.1 Preparation Before Installation
• Conventional panels cannot be installed on the seashore, and panels with special
anti-salt-alkali materials can be installed on the seashore
• The humidity at the installation site must not exceed 85RH;
• The installation site temperature should be -20 ℃ ~ 50 ℃, and the panels with
special low temperature materials can be installed at -30 ℃ ~ 20 ℃.
2.2 Cabinets Splicing
2.2.1 Splicing horizontally
2.2.2 Splicing vertically