EasyManuals Logo

Absen LR3.9-7.8 User Manual

Absen LR3.9-7.8
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
- 3 -
LR3.9-7.8 User Manual
Safety Information
The following marks on the product and in this manual indicate important safety
measures.
WARNING: Be sure to understand and follow all safety guidelines, safety instructions, warnings
and precautions listed in this manual. This product is for professional use only!
This product may result in serious injury or death due to fire hazard, electric shock, and
crushing hazard.
Please read this manual carefully before installing, powering up, operating and maintenance of
this product. Follow safety instructions in this manual and on the product. If you have any
questions, please seek help from Absen.
Beware of Electric Shock!
To prevent electric shock the device must be properly grounded during installation. Do not
ignore using the grounding plug, or else there is a risk of electric shock.
During a lightning storm, please disconnect the device’s power supply, or provide other suitable
lightning protection. If the equipment is not in use for a long time, please unplug the power cord.
When performing any installation or maintenance work (e.g. removing the fuses, etc.,) make
sure to turn off the master switch.
Disconnect AC power when the product is not in use, or before disassembling, or installing the
product.
The AC power used in this product must comply with local building and electrical codes, and
should be equipped with overload and ground fault protection.
The main power switch should be installed at a location near the product and should be clearly
visible and easily reached. This way in case of any failure the power can be promptly
disconnected.
Before using this product check all electrical distribution equipment, cables and all connected
devices, and make sure all meet current requirements.
Use appropriate power cords. Please select the appropriate power cord according to the
required power and current capacity, and ensure the power cord is not damaged, aged or wet. If
any overheating occurs, replace power cord immediately.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Absen LR3.9-7.8 and is the answer not in the manual?

Absen LR3.9-7.8 Specifications

General IconGeneral
BrandAbsen
ModelLR3.9-7.8
CategoryProjection Screen
LanguageEnglish

Related product manuals