Abus COWM300 - Care and maintenance; Cleaning

Care and maintenance
38
Care and maintenance
Cleaning
 Dusty detectors must be cleaned. You can clean dust from
the air vents of the detector using a vacuum cleaner or
compressed air.
 If necessary, you can remove the dust with a brush.
 You can clean the surface using a cloth slightly dampened in
soapy water.
 Do not allow water to penetrate inside the device.
 Do not clean the device in a dishwasher.
 Do not use sharp, pointed, abrasive, caustic or corrosive
cleaning materials or hard brushes.