Functional principle and features
EN 9
Functional principle and features
General
The Secvest wireless control panel (FUBE50001) is an optional accessory module for the Secvest
wireless alarm system (FUAA50xxx).
It can arm and disarm either the whole wireless alarm system or partitions therein, and it also has an
integrated chip key reader.
It is best to power this using an external power supply (PSU). Battery operation is also possible,
however, with certain concessions. In this case, please note the warnings surrounding these
concessions and those surrounding minimal battery operation further down.
The button on the wireless control panel is freely assignable so that it is possible to control
switching outputs on the alarm control panel or to activate one or more sub-areas internally.
As it is classified in protection class IP54, it should only be used indoors.
Device description
Status LEDs (partitions 1 to 4)
To Next Page
Loading...
Need help?
General
