Abus FUBE50001 - Page 45

Displays and functions
20 EN
Disarming the wireless alarm system
 Perform authentication in line with the configured control
panel operating mode.
 Disarm the wireless alarm system by pressing the "disarm"
button.
Status query
 Perform authentication in line with the configured control
panel operating mode.
 Run a status query for the wireless alarm system by pressing
the "status query" button.
 The LED display indicates the status of the different
partitions.
Arm internally/Switch output
 This button can be used either for arming internally or for
switching one (or more) wireless alarm system output(s). This
can be configured within the wireless alarm system.