Abus FUBE50001 User Manual

Displays and functions
EN 19
Exit delay
If you want the alarm panel to be armed after allowing for a set exit delay,
this can also be configured within the wireless alarm system.
Arming the whole wireless alarm system or individual partitions
 Perform authentication in line with the configured control
panel operating mode.
(1.) Press the "arm"
button to arm the
entire wireless
alarm system.
(2.) Press the key followed by
the relevant numbers for the
individual sub-areas which you
want to be armed. Confirm your
selection by pressing the
button in order to arm the
selected sub-areas.

Abus FUBE50001 Specifications

General

Brand	Abus
Model	FUBE50001
Category	Control Panel
Language	English