Abus FUBE50001 - Page 43

Installation | Displays and functions
18 EN
Keypad lighting
The brightness of the keypad lighting can be adjusted using the following key
combination:
Keypad lighting deactivated(Factory Default)
Brightness level 1
Brightness level 2
The keys must be pressed one after the other (not simultaneously) here.
Operating mode
You can control the wireless
alarm system via the control
panel in any of the three
operating modes:
Operating
mode
Authentication
Type in code
4-digit or 6-digit code
Prox Tag
registered chip key
"Quick start"
- none -
This can be configured within the wireless alarm system.
 For authentication, take a chip key which has been previously recognised
by the wireless alarm system and hold it over the ABUS logo on the
control panel.