Abus HDCC62500 - Page 42

English
BACKLIGHT
OFF Deactivate all backlight or contrast treatment
WDR Wide dynamic range function. Contrast treatment of the video image through
double exposure (short and long exposure) of the image.
GAIN
(LOW/MEDIUM/HIGH)
Intensity of the function
WDR BRIGHT (0~60) Move basic setting on a brightness scale
WDR OFFSET (0~60) Change basic gain factor
BLC Backlight compensation. Backlight compensation. The function displays light
areas of the video image darker, whilst maintaining the brightness of dark areas.
GAIN
(LOW/MEDIUM/HIGH)
Intensity of the function
AREA
(POSITION/SIZE):
Setting of the reference area for the calculation.
Press ENTER to change the position with the control
buttons. Press ENTER again to change the size
using the control buttons.
STANDARD Press ENTER to reset all parameters of the BLC
function to the factory settings.
HSBLC This function marks areas above a certain brightness level black. This function
may be used, for example, solely at night for oncoming vehicle headlights. In this
case, the headlights will be marked black. The registration plates next to the
headlights will then be more easily identifiable.
SELECTION (AREA
1~4)
Selection of one of max. four areas. The function is
applied in this area.
DISPLAY (ON/OFF) Activate/deactivate the area. Press ENTER once or
twice to adjust the position and size with the control
buttons.
LEVEL (0~100) Brightness threshold above which a pixel is marked
black.
MODE
(PERMANENT/NIGHT-
TIME ONLY)
Permanent activation of the function or only when in
night mode
MASKING (ON/OFF) Activate or deactivate all areas.
STANDARD Press ENTER to reset all parameters of the HSBLC
function to the factory settings.
RETURN Return to previous menu screen
42