WHITE BALANCE
ATW
Auto tracking white balance
White balance is performed by the camera automatically and continuously
updated.
AWC -> SET
With this function, white balance is performed once after pressing the ENTER
button and stored permanently.
MANUAL Manual setting of the white balance
BLUE (0~100) Proportion of blue in video image
RED (0~100) Proportion of red in video image
DAY&NIGHT
EXTERN. The day/night switching (ICR/IR) is controlled by the photo sensor integrated into
the camera (switching threshold: 5–15 Lux)
OFF Function deactivated
ON Function activated
The integrated IR LEDs can be deactivated in night mode if required.
COLOUR
The camera stays in colour mode permanently. The infrared cut filter is
constantly in front of the lens, and the IR LEDs are constantly off.
B/W
The camera stays in black/white mode permanently. The infrared cut filter is
constantly separated from the lens. The IR LEDs are switched on and off
automatically by the photo sensor.
NOISE REDUCTION
2DDNR Noise reduction function, optimised for static picture content
OFF Function deactivated
ON Function activated
3DDNR Noise reduction function, optimised for movement (image to image view)
OFF Function deactivated
ON Function activated
Back Return to previous menu screen
43
To Next Page
Loading...
