Abus HDCC82500 Quick Guide

30
English
3. Pull the connecting cable through the middle hole in the pole mount.
4. Secure the stainless steel clamps by tightening the screws.
5. Attach the seal between the pole mount and the wall mount.
6. Screw the wall mount into place using the four threaded screws and spring washer to help you.
7. Continue with the installation of the PTZ Dome.
Further information on installing the PTZ Dome can be found in Section 4.

Abus HDCC82500 Specifications

General

Brand	Abus
Model	HDCC82500
Category	Security Camera
Language	English